计算机教程

Mysql 5.5必赢娱乐棋牌.56版本(二进制包安装)自定义安装路径步骤记录

27 7月 , 2019  

安装路径:/application/mysql-5.7.18

安装路径:/application/mysql-5.5.56

1.前期准备

1.前期准备

mysql依赖

mysql依赖

libaio
yum install -y libaio
libaio
yum install -y libaio

创建用户mysql,以该用户的身份执行mysql

创建用户mysql,以该用户的身份执行mysql

useradd -s /bin/false -M mysql
useradd -s /bin/false -M mysql

下载mysql二进制包并解压

下载mysql二进制包并解压

cd /tools
wget https://dev.mysql.com/get/Downloads/MySQL-5.7/mysql-5.7.18-linux-glibc2.5-x86_64.tar.gz
tar -zxf mysql-5.7.18-linux-glibc2.5-x86_64.tar.gz -C /application/
cd /tools
wget https://dev.mysql.com/get/Downloads/MySQL-5.5/mysql-5.5.56-linux-glibc2.5-x86_64.tar.gz
tar -zxf mysql-5.5.56-linux-glibc2.5-x86_64.tar.gz -C /application/

切换到/application目录,将mysql文件夹名改短,给mysql目录做一个软链接

切换到/application目录,将mysql文件夹名改短,给mysql目录做一个软链接

cd /application/
mv mysql-5.7.18-linux-glibc2.5-x86_64/ mysql-5.7.18
ln -s mysql-5.7.18/ mysql
cd /application/
mv mysql-5.5.56-linux-glibc2.5-x86_64/ mysql-5.5.56
ln -s mysql-5.5.56/ mysql

在mysql目录下创建mysql-files,该文件夹权限为750,递归设置mysql目录的所属组和所属用户

递归设置mysql目录的所属组和所属用户

mkdir mysql/mysql-files
chmod 750 mysql/mysql-files
chown -R mysql:mysql mysql-5.7.18/
chown -R mysql:mysql mysql-5.5.56/

2.mysql目录内操作

2.mysql目录内操作

cd mysql
cd mysql

初始化数据库

初始化数据库

会在mysql目录内生成一个data目录,存放数据库的目录

会在mysql目录内生成一个data目录,存放数据库的目录

bin/mysqld --initialize --user=mysql --basedir=/application/mysql --datadir=/application/mysql/data
./scripts/mysql_install_db --basedir=/application/mysql --datadir=/application/mysql/data/ --user=mysql

返回结果最后一行的末尾有随机密码,我的记下来:wa0I:1w?V–a

更改所属用户和组

2017-04-28T02:49:00.853710Z 1 [Note] A temporary password is generated for root@localhost: wa0I:1w?V--a
chown -R root .
chown -R mysql data

想设置默认密码为空则将–initialize选项替换为–initialize-insecure选项

除了mysql目录下的data目录所属用户不变,其他所有文件的所属用户改为root

bin/mysqld --initialize-insecure --user=mysql --basedir=/application/mysql --datadir=/application/mysql/data

拷贝配置文件

安装ssl

cp support-files/my-medium.cnf /etc/my.cnf
bin/mysql_ssl_rsa_setup --datadir /application/mysql/data/

将mysql的配置文件拷贝为/etc/目录下的my.cnf

指定data目录的路径

修改配置文件

更改所属用户和组

sed -i 28i'log-error=/application/mysql/data/mysqld.error' /etc/my.cnf
chown -R root .
chown -R mysql data mysql-files

在配置文件插入了一行,进行配置错误日志

除了mysql目录下的data目录和mysql-files目录所属用户不变,其他所有文件的所属用户改为root

/etc/my.cnf Content:
# Example MySQL config file for medium systems.
#
# This is for a system with little memory (32M - 64M) where MySQL plays
# an important part, or systems up to 128M where MySQL is used together with
# other programs (such as a web server)
#
# MySQL programs look for option files in a set of
# locations which depend on the deployment platform.
# You can copy this option file to one of those
# locations. For information about these locations, see:
# http://dev.mysql.com/doc/mysql/en/option-files.html
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.
# The following options will be passed to all MySQL clients
[client]
#password = your_password
port = 3306
socket = /tmp/mysql.sock
# Here follows entries for some specific programs
# The MySQL server
[mysqld]
port = 3306
log-error=/application/mysql/data/mysqld.error
socket = /tmp/mysql.sock
skip-external-locking
key_buffer_size = 16M
max_allowed_packet = 1M
table_open_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking
# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin
# binary logging format - mixed recommended
binlog_format=mixed
# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1
# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=, MASTER_PORT=,
# MASTER_USER=, MASTER_PASSWORD= ;
#
# where you replace , , by quoted strings and
# by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host =
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user =
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port =
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin
# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = /usr/local/mysql/data
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = /usr/local/mysql/data
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 16M
#innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50
[mysqldump]
quick
max_allowed_packet = 16M
[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
[myisamchk]
key_buffer_size = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M
[mysqlhotcopy]
interactive-timeout

必赢娱乐棋牌,修改配置文件

拷贝启动程序

sed -i 's/^datadir=\/var\/lib\/mysql/datadir=\/application\/mysql\/data/g' /etc/my.cnf
sed -i 's/^socket=\/var\/lib\/mysql\/mysql.sock/socket=\/tmp\/mysql.sock/g' /etc/my.cnf
sed -i 's/^log-error=\/var\/log\/mariadb\/mariadb.log/log-error=\/application\/mysql\/data\/err.log/g' /etc/my.cnf
sed -i 's/^pid-file=\/var\/run\/mariadb\/mariadb.pid/pid-file=\/application\/mysql\/data\/mysql.pid/g' /etc/my.cnf
cp support-files/mysql.server /etc/init.d/mysql

等价于:

将mysql的启动程序拷贝到/etc/init.d/目录下,以便启动程序

vi /etc/my.cnf
datadir=/application/mysql/data
socket=/tmp/mysql.sock
log-error=/application/mysql/data/err.log
pid-file=/application/mysql/data/mysql.pid
/etc/my.cnf Content:
[mysqld]
datadir=/application/mysql/data
socket=/tmp/mysql.sock
# Disabling symbolic-links is recommended to prevent assorted security risks
symbolic-links=0
# Settings user and group are ignored when systemd is used.
# If you need to run mysqld under a different user or group,
# customize your systemd unit file for mariadb according to the
# instructions in http://fedoraproject.org/wiki/Systemd
[mysqld_safe]
log-error=/application/mysql/data/err.log
pid-file=/application/mysql/data/mysql.pid
#
# include all files from the config directory
#
!includedir /etc/my.cnf.d

编辑启动文件,配置启动目录

拷贝启动程序

方法一:

cp support-files/mysql.server /etc/init.d/mysql

思路是给配置文件提供的变量进行赋值。较麻烦。

将mysql的启动程序拷贝到/etc/init.d/目录下,以便启动程序

sed -i ':a;N;$!ba;s/basedir=\ndatadir=/basedir=\/application\/mysql\ndatadir=\/application\/mysql\/data/g' /etc/init.d/mysql
sed -i ':a;N;$!ba;s/mysqld_pid_file_path=\n/mysqld_pid_file_path=\/application\/mysql\/data\/mysqld.pid\n/g' /etc/init.d/mysql

编辑启动文件,配置启动目录

等价于将45、46两行

方法一:

basedir=
datadir=
mysqld_pid_file_path=

思路是给配置文件提供的变量进行赋值。较麻烦。

替换成


相关文章

发表评论

电子邮件地址不会被公开。 必填项已用*标注

网站地图xml地图